5v 2ch Flip-flop Latch Relay Module Bistable Self-locking Trigger Switch Board

Description:

2 Channel DC 5VSelf-lockingRelay Module(version 3) :
Working voltage: DC 5V
Working current: 1 relay 70MA;2 relay 140MA;
Standby current: 0.2mA
Load current: AC 250V / 10A, DC 30V / 10A
Trigger mode: Low pulse trigger
Size: 36mm * 32.3mm * 18.5mm (L * W * H)
Weight: 24.5 g

USE 1:
By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.
USE 2:
By default, the relay is release, MCU output low-pulse(0.3-1seconds), the relay pull, low-pulse again, the relay release, thethird low-pulse, the relay pull, and so on.

Module interface:
1. VCC: positive power supply (VCC)
2. GND: negative power supply (GND)
3. T (T1/T2/T3/T4): Low pulse trigger
Relay outputs:
1. NO: normally open relay interface
2. COM: Common Interface Relays
3. NC: normally closed relay interface
USE : By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on
Typical applications:

Automotive electronics
Motor/PLC/LED
Smart Home/Home automation
Emergency lighting
MCU development board
Toy car

Packing list:1 pcs1/2/4 Channel DC 5V/12VSelf-lockingRelay Module
Please select the version you need
Estimated delivery time：About 10 business days.We will use standard shipment for the orders. Normally it may need about 10 days, but sometimes please note: Delivery times are as provided by our carriers and are estimates only. Delays may occur during peak periods, and due to factors outside the carriers control.